Water Push-Fit Fittings by John Guest Speedfit in UK Specification

John Guest Speedfit 22Mm Speedfit Pipe Insert in UK Specification

GBP 0.44
(Indicative price - actual current price possibly lower)

Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mmx15Mm Speedfit Push Fit Flexi Hose in UK Specification

GBP 7.99
(Indicative price - actual current price possibly lower)

Flexi hoses are manufactured to a high quality you would expect from speedfit. The hoses are suitable for hot and cold water services, have a working pressure of 10 bar and have wras and nhbc approval. Length: 300mm.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 10Mm Speedfit Equal Tee in UK Specification

GBP 3.28
(Indicative price - actual current price possibly lower)

Connects plain pipe end to end.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22Mm White Pipe Clip in UK Specification

GBP 0.24
(Indicative price - actual current price possibly lower)

For securing pipe to walls.Not to be fitted any closer than 60mm from end of fittingpush-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22Mm Speedfit Stop Valve in UK Specification

GBP 11.99
(Indicative price - actual current price possibly lower)

Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mmx1/2"F Speedfit Female Tap Connector in UK Specification

GBP 1.87
(Indicative price - actual current price possibly lower)

Only requires simple hand tightening for connection to terminal taps.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mmx1/2" Bsp Brass Wingback Elbow in UK Specification

GBP 11.5
(Indicative price - actual current price possibly lower)

Suitable for central heating systems. Manufactured in dzr brass.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22Mmx3/4" Bsp Brass Wingback Elbow in UK Specification

GBP 14.99
(Indicative price - actual current price possibly lower)

Suitable for central heating systems. Manufactured in dzr brass.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22X15Mm Speedfit Straight Reducer Connector in UK Specification

GBP 5.2
(Indicative price - actual current price possibly lower)

Used with other fittings to reduce pipe bore diameter.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mm Speedfit Equal Elbow in UK Specification

GBP 1.81
(Indicative price - actual current price possibly lower)

Equal elbowsconnects pipe at 90 .Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22Mmx3/4"F Speedfit Female Tap Connector in UK Specification

GBP 2.69
(Indicative price - actual current price possibly lower)

Only requires simple hand tightening for connection to terminal taps.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 10Mm Speedfit Stop End in UK Specification

GBP 2.24
(Indicative price - actual current price possibly lower)

Stop endsproduces a permanent leak-proof seal, but can also be removed to allow extension to the system.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here