John Guest Speedfit 22Mm White Pipe Clip in UK Specification
Water Push-Fit Fittings
|
For securing pipe to walls.Not to be fitted any closer than 60mm from end of fittingpush-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting.It is recommended that all installations are checked prior to use to determine that a seal has been made. UK supply of quality water push-fit fittings by John Guest Speedfit, buy online with confidence at best discount price and fast shipping. Manufacturer product ID PC22W.
 Indicative Price: GBP 0.24
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification technical products in UK : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
John Guest Speedfit 22X10Mm Speedfit 4-Way Manifold in UK Specification
GBP 8.69
(Indicative price - actual current price possibly lower)
Water Push-Fit Fittings by John Guest Speedfit in UK Specification
Not suitable for central heating systems. Hot and cold water only, 65 c maximum.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.
More Details : click here
SEARCH this site : click here
|
|
|
John Guest Speedfit 15Mm Speedfit Plastic Service Valve in UK Specification
GBP 6.59
(Indicative price - actual current price possibly lower)
Water Push-Fit Fittings by John Guest Speedfit in UK Specification
Comply with water regulations, building regulations and british standards. Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.
More Details : click here
SEARCH this site : click here
|
|
|
John Guest Speedfit 15Mm Speedfit Emergency Shut Off Tap in UK Specification
GBP 6.06
(Indicative price - actual current price possibly lower)
Water Push-Fit Fittings by John Guest Speedfit in UK Specification
Comply with water regulations, building regulations and british standards. Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: John Guest Speedfit 22Mm White Pipe Clip in UK Specification
|
 Copyright © UKHardwares.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
