John Guest Speedfit 15Mmx1/2" Bsp Speedfit Push Fit Flexi Hose in UK Specification

John Guest Speedfit 15Mm Speedfit Emergency Shut Off Tap in UK Specification

GBP 6.06
(Indicative price - actual current price possibly lower)

Comply with water regulations, building regulations and british standards. Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15X10Mm Speedfit Straight Reducer Connector in UK Specification

GBP 1.98
(Indicative price - actual current price possibly lower)

Used with other fittings to reduce pipe bore diameter.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22Mm Speedfit Stop End in UK Specification

GBP 2.51
(Indicative price - actual current price possibly lower)

Stop endsproduces a permanent leak-proof seal, but can also be removed to allow extension to the system.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 22Mm Speedfit 'Superseal' Pipe Insert in UK Specification

GBP 0.5
(Indicative price - actual current price possibly lower)

The superseal pipe insert has been developed to be used with speedfit barrier pipe and speedfit fittings to provide an extra line of defence when installing a speedfit push fit system. The insert has its own 'o'ring which, together with a stem sliding within the pipe id, gives a secondary seal against the inside of the fitting.The speedfit connection, when made with the insert, has a number of design features.Sliding the stem of the insert into the pipe gives greater compression of the main 'o'ring on the pipe and greater rigidity of the length of pipe within the fitting, reducing the chance of leaks if a side load is applied. A connection is easier to make because the head of the insert has been designed for ease of insertion.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mmx25M Speedfit Barrier Pipe Coil in UK Specification

GBP 41.99
(Indicative price - actual current price possibly lower)

Manufactured to bs7291 parts 1 and 3 class s and cs kite marked.Supplied in 25m coilspush-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mm Speedfit Equal Tee in UK Specification

GBP 2.98
(Indicative price - actual current price possibly lower)

Connects plain pipe end to end.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings.Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight.

More Details : click here

SEARCH this site : click here

John Guest Speedfit 15Mm Speedfit Stem Elbow in UK Specification

GBP 4
(Indicative price - actual current price possibly lower)

Stem elbowdesigned to simplify pipe connection in restricted spaces. The speedfit stem elbow provides an instant swivel fitting so pipe can be orientated in any direction. Provides a swivel type connection. Suitable for central heating systems. A special 10mm version gives a neat connection from concealed plumbing to a radiator.Push-fit solution for plumbing & heating systemsfor use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes speedfit fittings can be used with copper pipe to bs en 1057 and speedfit cross-linked polyethylene (pex) barrier pipe to bs7291.Not to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards speedfit products are designed and manufactured under a fully integrated system assessed by b.S.I. To bs en iso9001. They are approved by the water regulations advisory scheme and bba. Speedfit 'pem' and 'pkm' fittings and speedfit barrier pipe are kitemarked to bs7291 part 1 and 3, class s. (licence no. Km39767).Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting.

More Details : click here

SEARCH this site : click here