Kennedy 2.0Mm Tin Kc3 Throwaway Cutter in UK Specification
KC3 Throwaway Milling Cutters
|
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155080X.
 Indicative Price: GBP 10.88
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification technical products in UK : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Kennedy 4Mm Hss-Cobalt B/N Kc3 Throwaway Cutter in UK Specification
GBP 13.99
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155036X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3/16" Hss-Cobalt B/N Kc3 Throwaway Cutter in UK Specification
GBP 16.19
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 5301020120.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 7/64" Tin L/S Kc3 Throwaway Cutter in UK Specification
GBP 12.49
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - inch - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID KEN-062-4570K.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 6.0Mm Ticn L/S Kc3 Throwaway Cutter in UK Specification
GBP 13.97
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - metric - ticn coated.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 3291070600.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 3/32" Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 9.59
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155044X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 7/64" Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 10
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID DFL 07.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1/16" Hss-Cobalt B/N Kc3 Throwaway Cutter in UK Specification
GBP 16.19
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID DFB04.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 11/64" Tin L/S Kc3 Throwaway Cutter in UK Specification
GBP 10.69
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - inch - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155059X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2Mm Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 7.69
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155023X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 7.99
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155026X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 3/16" Hss-Cobalt Kc3 Throwaway Cutter in UK Specification
GBP 7
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1154992X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 6Mm Hss-Cobalt B/N Kc3 Throwaway Cutter in UK Specification
GBP 13.99
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155034X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 11/64 Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 10
(Indicative price - actual current price possibly lower)
KC3 Throwaway Milling Cutters by Kennedy in UK Specification
Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID DFL 11.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Kennedy 2.0Mm Tin Kc3 Throwaway Cutter in UK Specification
|
 Copyright © UKHardwares.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
