KC3 Throwaway Milling Cutters by Kennedy in UK Specification
|
|
|
 Kennedy 2Mm Hss-Cobalt Kc3 Throwaway Cutter in UK Specification
GBP 8.16
(Indicative price - actual current price possibly lower)
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155008X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2.5Mm Hss-Cobalt Kc3 Throwaway Cutter in UK Specification
GBP 8.16
(Indicative price - actual current price possibly lower)
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155014X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 3.0Mm Ticn L/S Kc3 Throwaway Cutter in UK Specification
GBP 13.97
(Indicative price - actual current price possibly lower)
Long series - metric - ticn coated.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155057X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 5/32" Hss-Cobalt Kc3 Throwaway Cutter in UK Specification
GBP 7.39
(Indicative price - actual current price possibly lower)
Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID DFS 10.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 3.0Mm Tin Kc3 Throwaway Cutter in UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155078X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2.0Mm Ticn L/S Kc3 Throwaway Cutter in UK Specification
GBP 13.97
(Indicative price - actual current price possibly lower)
Long series - metric - ticn coated.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155049X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 2.0Mm Ticn Kc3 Throwaway Cutter in UK Specification
GBP 12.7
(Indicative price - actual current price possibly lower)
Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155093X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1.5Mm Tin Kc3 Throwaway Cutter in UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155083X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 10.0M Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 11.59
(Indicative price - actual current price possibly lower)
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155020X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1.0Mm Tin Kc3 Throwaway Cutter in UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155082X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1/8" Hss-Cobalt Kc3 Throwaway Cutter in UK Specification
GBP 7
(Indicative price - actual current price possibly lower)
Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1154990X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3Mm Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 8.29
(Indicative price - actual current price possibly lower)
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155030X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 6Mm Hss-Cobalt B/N Kc3 Throwaway Cutter in UK Specification
GBP 13.99
(Indicative price - actual current price possibly lower)
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155034X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1/16" Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 10.99
(Indicative price - actual current price possibly lower)
Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155045X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 8Mm Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 10.62
(Indicative price - actual current price possibly lower)
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155025X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 4.5Mm Ticn L/S Kc3 Throwaway Cutter in UK Specification
GBP 13.97
(Indicative price - actual current price possibly lower)
Long series - metric - ticn coated.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155051X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2.5Mm Tin Kc3 Throwaway Cutter in UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID DMS250T.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 5/32" Ticn Kc3 Throwaway Cutter in UK Specification
GBP 3.36
(Indicative price - actual current price possibly lower)
Short series - inch - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 5281070100.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1.5Mm Ticn L/S Kc3 Throwaway Cutter in UK Specification
GBP 13.97
(Indicative price - actual current price possibly lower)
Long series - metric - ticn coated.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID DML150TN.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3Mm Hss-Cobalt B/N Kc3 Throwaway Cutter in UK Specification
GBP 16
(Indicative price - actual current price possibly lower)
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155032X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1/4" Hss-Cobalt L/S Kc3 Throwaway Cutter in UK Specification
GBP 10
(Indicative price - actual current price possibly lower)
Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155042X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 6.0Mm Tin Kc3 Throwaway Cutter in UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. UK supply of quality kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping. Manufacturer product ID CRZT1155084X.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: KC3 Throwaway Milling Cutters by Kennedy in UK Specification
|
 Copyright © UKHardwares.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
