Schneider Electric Preventa Cat. 3 Safety Relay Xpsvne----P 24V Dc in UK Specification

Schneider Electric Preventa Cat. 1 Safety Relay Xpsate----P 24V Dc in UK Specification

GBP 299.99
(Indicative price - actual current price possibly lower)

For emergency stop and switch monitoring. 24v dc. Safety modules xpsate are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the safety requirements for the electrical monitoring of switches in protection devices conforming to standard en/iso 14119. They provide protective for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of a fault in the safety circuit itself. In addition to the stop-category0 instantaneous opening 2 n/o safety outputs, the modules incorporate 3 n/o stop-category1 time delay outputs which allow a controlled deceleration of the motor components until a complete stop is achieved. At the end of the preset delay, the supply is disconnected by opening the time delay output circuits. The time delay of the 3 output circuits is adjustable between 0 and 30 seconds using a 12-position selector switch.These xpsate modules incorporate 4 solid-state outputs for plc signalling and 4 leds to provide information on the monitoring circuit status. The start button monitoring function is configurable depending on the wiring. UK supply of quality electrical preventa safety relays by Schneider Electric, buy online with confidence at best discount price and fast shipping.

More Details : click here

SEARCH this site : click here

Schneider Electric Preventa Cat. 4 Safety Relay Xpsbce----P 24V Ac/Dc in UK Specification

GBP 199.99
(Indicative price - actual current price possibly lower)

For electrical monitoring of two-hand control stations. 24v ac/dc. Safety modules xpsbce meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative. Depending on the application, the requirements of type c standards specific to the machinery involved must be met (additional personal protection methods may have to be considered).To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within 0.5 s (synchronous activation). If one of the two pushbuttons is released during a dangerous operation, the control sequence is cancelled. Resumption of the dangerous operation is possible only if both pushbuttons are returned to their initial position and reactivated within the required time interval. The safety distance between the control units and the hazardous zone must be sufficient to ensure that when only one operator is released, the hazardous zone cannot be reached before the dangerous movement has been completed or stopped. These xpsbce modules incorporate 2 n/o safety outputs and a relay output for signalling to the plc and have 3 leds to provide information on the monitoring circuit status.

More Details : click here

SEARCH this site : click here

Schneider Electric Preventa Cat. 4 Safety Relay Xpsafl----P 24V Ac/Dc in UK Specification

GBP 160
(Indicative price - actual current price possibly lower)

For emergency stop, switch and safety light curtain monitoring. 24v ac/dc. Safety modules xpsafl meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1. They are used to monitor emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and they can also be used for monitoring type 4 light curtains conforming to en/iec 61496-1 that have solid-state safety outputs. The preventa safety modules xpsafl----p incorporate removable terminal blocks, thus optimising machine maintenance. These xpsafl modules incorporate 3 n/o safety outputs for plc signalling and 3 leds to provide information on the monitoring circuit status. The start button monitoring function is configurable depending on the wiring. UK supply of quality electrical preventa safety relays by Schneider Electric, buy online with confidence at best discount price and fast shipping. Manufacturer product ID XPSAFL5130P.

More Details : click here

SEARCH this site : click here

Schneider Electric Preventa Cat. 4 Safety Relay Xpsbf 24V Dc in UK Specification

GBP 209.99
(Indicative price - actual current price possibly lower)

For electrical monitoring of two-hand control stations. 24v dc. Safety modules xpsbf meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative. Depending on the application, the requirements of type c standards specific to the machinery involved must be met (additional personal protection methods may have to be considered).To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within 0.5 s (synchronous activation). If one of the two pushbuttons is released during a dangerous operation, the control sequence is cancelled. Resumption of the dangerous operation is possible only if both pushbuttons are returned to their initial position and reactivated within the required time interval. The safety distance between the control units and the hazardous zone must be sufficient to ensure that when only one operator is released, the hazardous zone cannot be reached before the dangerous movement has been completed or stopped. These xpsbf modules incorporate 2 n/o safety outputs and 2 solid-state outputs for plc signalling and have 3 leds to provide information on the monitoring circuit status.

More Details : click here

SEARCH this site : click here

Schneider Electric Preventa Cat. 1 Safety Relay Xpsba 230V Ac in UK Specification

GBP 130
(Indicative price - actual current price possibly lower)

For electrical monitoring of two-hand control stations. 24v ac/dc. Safety modules xpsba meet the requirements of performance level pl c/category 1 conforming to standard en/iso 13849-1 and the european standard en 574/iso 13851 for two-hand control systems. The control stations must be designed and installed such that they cannot be activated involuntarily or easily rendered inoperative. Depending on the application, the requirements of type c standards specific to the machinery involved must be met (additional personal protection methods may have to be considered).To initiate a dangerous movement, both operators (two-hand control pushbuttons) must be activated within 0.5 s (synchronous activation). If one of the two pushbuttons is released during a dangerous operation, the control sequence is cancelled. Resumption of the dangerous operation is possible only if both pushbuttons are returned to their initial position and reactivated within the required time interval. The safety distance between the control units and the hazardous zone must be sufficient to ensure that when only one operator is released, the hazardous zone cannot be reached before the dangerous movement has been completed or stopped. These xpsba modules incorporate 1 n/o safety outputs and 1 relay output for signalling to the plc and have 2 leds to provide information on the monitoring circuit status.

More Details : click here

SEARCH this site : click here

Schneider Electric Preventa Cat. 3 Safety Relay Xpsac----P 115V Ac in UK Specification

GBP 124.99
(Indicative price - actual current price possibly lower)

For emergency stop and switch monitoring. Safety modules xpsac are used for monitoring emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and also meet the requirements for the electrical monitoring of switches in protection devices conforming to standard en 1088/iso 14119. They provide protection for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of an anomaly in the safety circuit itself.These xpsac modules incorporate 3 n/o safety outputs and a solid-state output for signalling to the plc and have 2 leds to provide information on the monitoring circuit status. UK supply of quality electrical preventa safety relays by Schneider Electric, buy online with confidence at best discount price and fast shipping. Manufacturer product ID XPSAC3421P.

More Details : click here

SEARCH this site : click here

Schneider Electric Preventa Cat. 4 Safety Relay Xpsaf 24V Ac/Dc in UK Specification

GBP 124
(Indicative price - actual current price possibly lower)

For emergency stop and switch monitoring. 24v ac/dc. Safety modules xpsaf meet the requirements of performance level pl e/category 4 conforming to standard en/iso 13849-1. They are used to monitor emergency stop circuits conforming to standards en/iso 13850 and en/iec 60204-1 and for electrical monitoring of switches activated by protection devices conforming to standard en/iso 14119.The preventa safety modules xpsaf----p incorporate removable terminal blocks, thus optimising machine maintenance. These xpsac modules incorporate 3 n/o safety outputs and have 3 leds to provide information on the monitoring circuit status. The start button monitoring function is configurable depending on the wiring. UK supply of quality electrical preventa safety relays by Schneider Electric, buy online with confidence at best discount price and fast shipping. Manufacturer product ID XPSAF5130.

More Details : click here

SEARCH this site : click here