Iscar Tag N3C Insert Grade Ic92 8 in UK Specification

Iscar Gimy-315 Insert Grade Ic635 in UK Specification

GBP 8.8
(Indicative price - actual current price possibly lower)

Gimy (full radius) : utility single-ended inserts with f/y-type chipformers, used for deep grooving and turning at low-to-medium feeds. The full-radius inserts can cut arcs to 250 . Grade : ic20used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade.Iso range - p/m/k: (m10-m25)(k10-k20)iso range - h/s/n: (h05-h15)(s05-s20)(n05-n25)grade or coating type: un-coatedcoating layers: uncoatedgrade : ic20na cermet grade, used for grooving and turning applications. Recommended for semi-finishing and finishing operations when excellent surface finish is required. Wear resistant, prevents built-up edge.Iso range - p/m/k: (p05-p25)(m05-m15)grade or coating type: un-coatedcoating layers: uncoatedgrade : ic830a 'sumo tec' altin tin pvd coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance.Iso range - p/m/k: (p20-p40)(m25-m35)iso range - h/s/n: (s15-s30)grade or coating type: pvdcoating layers: altin tingrade : ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance.

More Details : click here

SEARCH this site : click here

Iscar Gip 1.47-0.00 Insert Grade Ic908 in UK Specification

GBP 21.19
(Indicative price - actual current price possibly lower)

Gip (flat top w m) : flat top precision ground inserts for grooving grade : ic808recommended for a very wide range of materials.Iso range - p/m/k (p15-p30)(m20-m30)iso range - h/s/n (h10-h20)(s10-s25)grade or coating type pvdcoating layers tialn/altin tin grade : ic20uncoated carbide grade.Iso range - p/m/k (m10-m25)(k10-k20)iso range - h/s/n (h05-h15)(s05-s20)(n05-n25)grade or coating type un-coatedcoating layers uncoated. UK supply of quality parting inserts by Iscar, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 6402828.

More Details : click here

SEARCH this site : click here

Iscar Tag L2C-6D Insert Grade I C808 in UK Specification

GBP 8.99
(Indicative price - actual current price possibly lower)

Tag r/l-c parting, single-ended insert for bars, hard materials and tough parting applications.Tag insert features: very rigid clamping in a tangentially oriented pocket. Enables machining at very high feed rates and provides excellent straightness and surface finish. Recommended for parting large diameter parts and for interrupted cuts. Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications. The combination of tangential clamping and free chip flow results in improved tool and insert life time. Provides a solution to the problem of inserts being pulled out during retraction.The tag inserts are available with the familiar j- and c-type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The tang-grip family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced ic830 and ic808 sumo tec grades. The blades are in standard siuzes which fit iscar's standard blocks. UK supply of quality parting inserts by Iscar, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 6003640.

More Details : click here

SEARCH this site : click here

Iscar Tag N4Jt Insert Grade Ic808 in UK Specification

GBP 10
(Indicative price - actual current price possibly lower)

Tag n-j/js/jt parting and grooving insertstag insert features very rigid clamping in a tangentially oriented pocket. Enables machining at very high feed rates and provides excellent straightness and surface finish. Recommended for parting large diameter parts and for interrupted cuts. Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications. The combination of tangential clamping and free chip flow results in improved tool and insert life time. Provides a solution to the problem of inserts being pulled out during retraction.The tag inserts are available with the familiar j- and c-type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The tang-grip family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced ic830 and ic808 sumo tec grades. The blades are in standard siuzes which fit iscar's standard blocks. UK supply of quality parting inserts by Iscar, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 6003680.

More Details : click here

SEARCH this site : click here

Iscar Gtn-9 Insert Grade Ic354 in UK Specification

GBP 17.2
(Indicative price - actual current price possibly lower)

Parting inserts for the gtn system.Grade name: ic20insert material: carbide - uncoatediso range: k10-20 n05-25 s05-20 h05-15ansi range: c2-c3grade description: 'an uncoated carbide grade. Used for semi-finishing, finishing and semi-roughing of aluminum, cast iron and stainless steel. Used at low to medium speeds and feeds.'grade name: ic54insert material: carbide - uncoatediso range: p40ansi range: c5grade description: 'suitable for milling, turning and planing at cutting speeds with large feeds; for machining in unfavorable conditions; permits use of sharp positive angles. Workpiece materials: steel, steel castings with cavities, austenitic stainless steel, stainless steel castings.'grade name: ic328insert material: carbide - pvd coatediso range: p25-50 m30-40 s25-30ansi range: c5-c6 c2-c3coating description: tin/ticngrade description: 'a tin/ticn pvd coated tough grade. Used for milling, grooving, parting and drilling a wide range of workpiece materials, at low to medium cutting speeds.'grade : ic354a thin pvd coated ticn layer on a p40 substarte. High toughness.

More Details : click here

SEARCH this site : click here

Iscar Tag N3A Insert Grade Ic20 in UK Specification

GBP 7.09
(Indicative price - actual current price possibly lower)

Tag n-a : parting grooving and slitting, single-ended inserts. Used for machining aluminum. Grade : ic20uncoated carbide grade.Iso range - p/m/k (m10-m25)(k10-k20)iso range - h/s/n (h05-h15)(s05-s20)(n05-n25)grade or coating type un-coatedcoating layers uncoated. UK supply of quality parting inserts by Iscar, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 6003670.

More Details : click here

SEARCH this site : click here

Iscar Gipm-2.35-A46L Insert Grade Ic328 in UK Specification

GBP 14.29
(Indicative price - actual current price possibly lower)

Gipm-a46: precision ground back turning inserts, for external machining on swiss type automatics.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticn. UK supply of quality parting inserts by Iscar, buy online with confidence at best discount price and fast shipping. Manufacturer product ID 6498647.

More Details : click here

SEARCH this site : click here